DIFFERENTIAL PRESSURE SENSOR with selectable measurment range DS200
DIFFERENTIAL PRESSURE SENSOR with selectable measurment range DS200
MENSIO measuring system
Sensor for differential pressure or volume flow
Measuring range from 0…50 Pa (0.5 mbar) up to 0…6000 Pa (60 mbar)
Open collector alarm output (max. 30 V / 30 mA)
Damping of the output signal adjustable via DIP switch
Supply voltage 17…30 Vdc; 24 Vac (+/-15%)
Compact plastic housing IP 54
Software menu for parameterization:
Switchable measuring variables (differential pressure or volume flow)
Selectable units (metric or imperial)
k-factor (input range k-factor up to 10,000) Setting for volumetric flow
4 calibrated measuring ranges selectable via DIP-switch
Characteristic adjustment: Linear / radiated
Analogue output signal 0/2…10 V or 0/4…20 mA
Measuring mode with adjustable limit value
Alarm delay time (switching delay) 1 sec. to 15 minutes adjustable
Switching and contact logic for 4 different states
The DS200 differential pressure sensor is used to measure small differential pressures in ventilation and air conditioning systems. In combination with an effective pressure transducer (for example, a venturi nozzle, a venturi tube, a measuring diaphragm), suitable for the calculation of the volumetric flow.
Known fields of application are: Ventilation systems, room pressure monitoring, filter monitoring process, environmental, clean room technology, fan technology, pump technology, suction technology, pressure switch.
All our differential pressure transducers of the DS series have our optimized mechanical measuring system MENSIO. The MENSIO has been steadily developed over many years and has always proved itself against all adversities. It is particularly characterized by its precision, longevity and insensitivity to external influences.
Operating mode:
Measuring mode
Measuring medium:
Air or non-aggressive gases
Measuring principle:
Electromechanical diaphragm measuring system
Measuring unit:
Pa / InH20 or m3/h or cfm
Smallest measuring range:
0…50 Pa (0.5 mbar)
Largest measuring range:
0…6000 Pa (60 mbar)
Measuring range:
DS200-P2: 0…200 Pa (2 mbar), 0…150 Pa, 0…100 Pa, 0…50 Pa (0.5 mbar)
DS200-P10: 0…1000 Pa (10mbar), 0…500 Pa, 0…300 Pa, 0…200 Pa (2 mbar)
DS200-P60: 0…6000 Pa (60 mbar), 0…4000 Pa, 0…3000 Pa, 0…2000 Pa (20 mbar)
Measuring range selection:
by software menu
Characteristic:
linear or radiated selectable by software menu
Ambient temperature:
-10…+50°C
Storage temperature:
-25…+60°C
Limit signal Output / alarm output:
open collector, max 30 V / 30 mA
Alarm delay time:
freely adjustable in the range of 0 … 60 seconds – 2 … 15 minutes
Switching logic:
MIN or MAX
Contact logic:
active high or active low
Overpressure protection:
0.2 bar
Static pressure:
max. 0.2 bar
Zero point calibration:
Adjustable by REEDcontact, no cyclic zero-point calibration required
Reaction time:
direct
| Error limits (related to the actual range) | |||||
| Zero deviation | Final value deviation | Linearity | Resolution | Hysteresis | |
| DS85-P200 | |||||
| 0…200 Pa | ± 0.5 % | ± 0.5 % | ± 0.25 % | ± 0.1 % | ± 1 % |
| 0…150 Pa | ± 0.75 % | ± 0.6 % | ± 0.4 % | ± 0.2 % | ± 0.7 % |
| 0…100 Pa | ± 1 % | ± 0,71 % | ± 0.5 % | ± 0.2 % | ± 0.5 % |
| 0…50 Pa | ± 2 % | ± 1 % | ± 1 % | ± 0.3 % | ± 0.5 % |
| DS85-P1000 | |||||
| 0…1000 Pa | ± 0.5 % | ± 0.5 % | ± 0.25 % | ± 0.1 % | ± 0.2 % |
| 0…500 Pa | ± 0.7 % | ± 0.7 % | ± 0.5 % | ± 0.2 % | ± 0.2 % |
| 0…300 Pa | ± 0.9 % | ± 0.9 % | ± 0.9 % | ± 0.3 % | ± 0.2 % |
| 0…200 Pa | ± 1 % | ± 1 % | ± 1.25 % | ± 0.3 % | ± 0.2 % |
| DS85-P6000 | |||||
| 0…6000 Pa | ± 0.5 % | ± 0.5 % | ± 0.25 % | ± 0.1 % | ± 0.2 % |
| 0…4000 Pa | ± 0.7 % | ± 0.7 % | ± 0.4 % | ± 0.15 % | ± 0.2 % |
| 0…3000 Pa | ± 0.9 % | ± 0.9 % | ± 0.6 % | ± 0.2 % | ± 0.2 % |
| 0…2000 Pa | ± 1 % | ± 1 % | ± 0.75 % | ± 0.25 % | ± 0.2 % |
Housing:
UL 94 HB; Ultramid with hinged lid of ABS
Dimensions:
95 x 70 x 54 mm (w x h x d)
Weight:
approx. 250 g
Protection class:
IP54 according EN60529
Display:
two-line alphanumeric LCD display, 2 x 16 characters
Electrical connections:
3- or 4-wires cable, 50 cm length, colour coded, electronic protected against false polarity
Pressure connections:
hose connections 5 mm ø and 6 mm ø
Operational position:
Vertical, position dependence when rotated through 90 ° approx. 25 Pa
Power supply:
17…30 Vdc or 24 Vac ± 15 %
Power consumption:
approx. 6 mA @ 17 Vdc and 0…10 V output
approx. 19 mA @ 30 Vdc and 0…10 V output
Output:
0/2…10 V(Imax = 10 mA @ 20 Vdc, Imax = 17 mA @ 30 Vdc)
0/4…20 mA, max load 200 Ω
EMC:
EN 61000-6-2, EN 61000-6-3, CE-mark
RoHS:
According RoHS-directive 2011/65/EU
Are you interested?
Leave us a message and we will get back to you as soon as possible.